How To Measure For Special Size Curtains?

Outdoor Curtain Grommet Top & Bottom

We recommend fullness ratio 1.5x-2x to create the waves and folds when close the curtains.

①Choose your curtain width

If you already have a curtain pole or track:

Measure its full length, excluding any finials.

(This part of the width I call A.)

If you do not hve curtain pole or track fitted:

Measure the full length of your window, if it is in a recess, measure the full length of the recess.

(This part of the width I call B.)

If you have a recessed window, you have the option of fitting the curtains inside the recess or above. If you want your curtains above the window, you need to decide how far your curtains will over-hang the wall, each side of the window. This would normally be around 8 inches(20cm) each side and enables the curtains to open wider, allowing more daylight to enter the room and gives room for the fixture on the end of the curtain pole.

(This part of the width I call C.)

Now add A+B+B(MEASUREMENT C). This will give the desired curtain track/pole width.

Please note do not include curtain pole finials in your width measurements.

②Choose your curtain lenth

The total length of the curtain, the length of the upper and lower rings, minus 10cm*2.

So the distance between the two curtain rods is greater than the total length of the curtain-4inch*2.

Outdoor Curtain Grommet Top

CURTAIN WIDTH AND LENGTH

①Choose your curtain width ②Choose your curtain Length

Grommet

We recommend fullness ratio 1.5x-2x to create the waves and folds when close the curtains

① Choose your curtain width

MEASUREMENT C

if you already have a curtain pole or track.

Measure its full length, excluding any finials

if you do not have curtain pole or track fitted

MEASUREMENT A

Measure the full length of your window, if it is in a recess, measure the fullength of the recess

MEASUREMENT B

if you have a recessed window, you have the option of fitting the curtains inside the recess cr above. if you want your curtains above the window, you need to decide how far your curtains will over-hang the wall. each side c! the window,Ths would normally be around 20cm(8 inches) each side and enables the curtains to open wider, allowing more daylight to enter the room and gives room for the fixture on the end of the curtain pole

Now add A+B+B(MEASUREMENT C). This will give the desired curtain track/pole width.

Please note do not include curtain polo finials in your width measurements.

②Choose your curtain length

A.Sill Length

Length of the top of the pole to the bottom of the window +1.2curtain will be added above the eyelet to stand above the pole)

B.Below Sill

Length of the top of the pole to the bottom of the window +1.2"curtain will be added above the eyelet to stand above the pole)Approximately 6’’

C.Floor Length

Pole top to floor length+.2"(curtain will be added above the eyelet to stand above the pole 》Approximately 1”

Outdoor Curtain Tap top

We think most of time curtains with tab top heading style don't need too much stacks and gathering at top, so we recommend fulness ratio 1-1.5xFor example, rod full length is 80 inches, the single panel width need 40-60 inches if you need 2 panels to hang.

①Choose your curtain width

MEASUREMENT C

lf you already have a curtain pole or track.Measure its full length, excluding any finialsIf you do not have curtain pole or track fitted

MEASUREMENT A

Measure the full length of your window, if it is in a recess, measure the full length of the recess

MEASUREMENT B

If you have a recessed window, you have the option of fitting the curtains inside the recess or above. lf you want your curtains above the window, you need to decide how far your curtains will over-hang the wall, each side of the window This would normally be around 20cm(8 inches) each side and en-ables the curtains to open wider, allowing more daylight to enter the room and gives room for the fixture on the end of the curtain pole

Finial

Now add A+B+B(MEASUREMENT C)This will give the desired curtain track/pole width.

Please note do not include curtain pole finials in your width measure.

ments.

② Choose your curtain length

A.Sill Length

Length of the top of the pole to the bottom of the window

B.Below Sill

Length of the top of the pole to the bottom of the window+Approximately

C.Floor Length

Pole top to floor length-Approximately 1"